Heavy oxidation on the internal face of a stainless pipe weld can hinder cleaning and impair local corrosion performance.
Technical considerations
Heavy oxidation on the internal face of a stainless pipe weld can hinder cleaning and impair local corrosion performance. Shielding should therefore not be considered only at the visible outside weld face. Root protection, gas quality, leakage control and purge duration belong in the welding procedure. The appropriate gas arrangement and flow depend on joint geometry and the qualified process; one arbitrary flow rate is not suitable for every diameter. Acceptance after welding should include the examinations required by the project rather than relying only on a bright external appearance.
Distinguish the outer face from the root
A neat external bead can coexist with a heavily oxidised internal root. Inspecting an accessible sample joint before production can reveal the problem early. Increasing gas flow is not always the remedy because leaks and turbulence can undermine protection. Agree how the root condition will be accepted before welding begins, especially where access disappears after assembly.
Does a bright outer weld prove the inside condition?
No. The root must be assessed separately with a method suitable for the application.
