A hollow section corner is not the mathematically sharp right angle shown in a simple sketch.
Technical considerations
A hollow section corner is not the mathematically sharp right angle shown in a simple sketch. Inner and outer radii depend on manufacturing route and product dimensions. They affect insert clearance, joint gaps and theoretical area. When seating a plate inside a section, using only A−2t may not describe the available space near the corners. Hole positions and weld placement close to corners should also account for this geometry. For close-fitting assemblies, request actual corner data or an approved sample of the proposed product.
Trial the insert against real corners
The corners of an inserted square plate can interfere with the section’s internal radii even when the clearance between flat faces is sufficient. Agree any corner relief or revised insert shape with the designer. In series production, an easy fit in one sample does not guarantee the same outcome across a batch, so define tolerance allowance as well as nominal dimensions.
Is internal space simply outer size minus two walls?
That describes flat-face clearance approximately; usable space near corners differs.
