2B is a mill-surface designation used for cold-rolled sheet.
Direct answer and application context
2B is a mill-surface designation used for cold-rolled sheet. It has a general-purpose, slightly reflective appearance and is not a mirror polish. Appearance may vary between batches carrying the same designation, so specifying 2B alone does not guarantee a visual match on a decorative project. Grade and surface finish are separate requirements.
Ordering and fabrication checks
State whether the sheet surface will remain visible after cutting and bending. Samples and batch consistency may matter for adjacent exposed panels. If protective film is required, ask about compatibility with the cutting process. Cleanability depends on component geometry and post-fabrication treatment as well as the original mill finish.
Checking adjacent panels
Two adjacent 2B panels from different batches may show a reflection difference on a service counter. The grade can be correct while the visual expectation remains unmet. Comparing panels together under their intended lighting establishes appearance requirements more clearly than examining an isolated small sample.
Is 2B a mirror finish?
No. It is a general-purpose mill finish and is not the same designation as a mechanical mirror polish.
