Wall thickness selection for stainless hollow sections
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Wall thickness selection for stainless hollow sections

Wall thickness is only one part of a hollow section's load-bearing behaviour.

Wall thickness is only one part of a hollow section's load-bearing behaviour.

Technical considerations

Wall thickness is only one part of a hollow section's load-bearing behaviour. Overall dimensions, free span, load direction, support conditions and connections must be considered together. A thicker wall does not automatically correct an inadequate joint or unsuitable outer dimensions. Local crushing and connection distortion deserve particular attention in thin walls. State the nominal thickness together with the relevant tolerance on the drawing. A weight estimate helps purchasing, but it does not replace calculations for deflection, buckling or member capacity.

Assess the connection zone separately

A thin section welded to a base plate may face local demands even when the member seems adequate across its span. Reinforcement, internal components or a different joint may be needed through design. Revising wall thickness can also change welding access and heat input. Reducing wall alone to reach a target mass is not a reliable structural design method.

Does a thicker wall solve every issue?

No. Overall size, span, connections and loading must also be checked.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗