Using stainless hexagon bar for CNC-turned parts
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Using stainless hexagon bar for CNC-turned parts

Hexagon stock can reduce additional milling when a component needs wrench flats. Workholding and toolpaths must accommodate the hexagonal geometry.

Hexagon stock can reduce additional milling when a component needs wrench flats. Workholding and toolpaths must accommodate the hexagonal geometry.

Technical assessment

Hexagon stock can reduce additional milling when a component needs wrench flats. Workholding and toolpaths must accommodate the hexagonal geometry.

Practical example and verification method

For a component with central wrench flats and turned ends, the stock hexagon can remain. Plan the sequence to avoid marking finished faces during rechucking and identify which operation establishes each finished datum. Identify which flat faces will remain as supplied. Compare their required dimensions and appearance with stock tolerance. Plan the datum created in the first setup and the contact surfaces used in the second. If witness marks are unacceptable, check jaw contact on a sample. Hexagon stock may remove operations, but if the flats also require finishing, recalculate the expected cycle-time advantage rather than assuming it remains.

Order information and decision limits

Provide finished across-flats size, turned diameter, clamping length and corner requirements. If the raw-stock faces remain on the finished part, their appearance and tolerance need separate approval.

Using stainless hexagon bar for CNC-turned parts

Hexagon stock can reduce additional milling when a component needs wrench flats. Workholding and toolpaths must accommodate the hexagonal geometry.

What should this enquiry include?

Provide finished across-flats size, turned diameter, clamping length and corner requirements.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗