The letter h identifies an external-size tolerance zone, while the number identifies the tolerance grade. The numerical width depends on nominal diameter.
Technical assessment
The letter h identifies an external-size tolerance zone, while the number identifies the tolerance grade. The numerical width depends on nominal diameter.
Practical example and verification method
For an order written as 20 mm h9, identify the nominal-diameter interval in the applicable table first. Transfer the limits to the drawing or specification; an arbitrary online table is not a purchase specification. Confirm the drawing’s tolerance system and applicable edition of the standard. Find the correct nominal-diameter interval, then check that the measuring instrument can resolve the required limits. Consider the effect of material and instrument temperature. Compare the supplier’s stock tolerance with the finished-part requirement; the same letter-and-grade designation can produce different numerical limits at different nominal diameters.
Order information and decision limits
Specify nominal diameter, applicable standard and inspection method rather than asking only for h9. Do not apply the micrometre range for one diameter to every diameter; consult the applicable tolerance table.
Understanding h9 and h11 tolerances for stainless shafts
The letter h identifies an external-size tolerance zone, while the number identifies the tolerance grade. The numerical width depends on nominal diameter.
What should this enquiry include?
Specify nominal diameter, applicable standard and inspection method rather than asking only for h9.
