Thermal movement in long stainless section assemblies
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Thermal movement in long stainless section assemblies

Temperature changes in a long assembly can require movement between fixing points.

Temperature changes in a long assembly can require movement between fixing points.

Technical considerations

Temperature changes in a long assembly can require movement between fixing points. For a facade or handrail, consider the difference between installation temperature and seasonal service temperatures. Sliding connections, expansion gaps and anchor functions should be defined across the whole system. Enlarging a hole arbitrarily does not create a controlled movement detail and may weaken load transfer. Assemblies containing different materials may also expand by different amounts. Solar exposure can make actual component temperature differ from air temperature, which should be considered in the design assumptions.

Preserve movement allowance during installation

Sealant, welding or a rigid cover can accidentally block an expansion allowance shown on the design. Measure these gaps during installation and verify that connections can move in the intended direction. Consider interaction with nearby brittle elements such as glass or cladding. Leave maintenance information so later work does not unintentionally lock a movement detail that was necessary for seasonal operation.

Is air temperature the only thermal input?

No. Solar exposure and installation conditions can affect actual component temperature.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗