Straightness and runout inspection of stainless shafts
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Straightness and runout inspection of stainless shafts

Straightness describes a form characteristic of the axis; runout is measured relative to a chosen datum and rotation arrangement. They are not identical.

Straightness describes a form characteristic of the axis; runout is measured relative to a chosen datum and rotation arrangement. They are not identical.

Technical assessment

Straightness describes a form characteristic of the axis; runout is measured relative to a chosen datum and rotation arrangement. They are not identical.

Practical example and verification method

Place the shaft on the two defined supports and position the indicator at the drawing’s inspection location. If support contact changes during rotation, the reading can reflect the setup as well as the component. Define which surfaces establish the reference axis. Check that the fixture does not mark the component or introduce extra bending. Repeat several rotations at the same section to assess repeatability, then measure at other axial positions to reveal local variation. Report support spacing and measurement location with the result; without those details, a reading taken in another workshop may not be directly comparable.

Order information and decision limits

Include inspection length, support positions and datum definition on the drawing. A long slender shaft can sag under its own weight; measurement conditions affect the result.

Straightness and runout inspection of stainless shafts

Straightness describes a form characteristic of the axis; runout is measured relative to a chosen datum and rotation arrangement. They are not identical.

What should this enquiry include?

Include inspection length, support positions and datum definition on the drawing.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗