Galvanic corrosion at a stainless pipe connection to another metal requires consideration of an electrolyte as well as electrical contact.
Technical considerations
Galvanic corrosion at a stainless pipe connection to another metal requires consideration of an electrolyte as well as electrical contact. A dry indoor connection differs from an outdoor joint that remains wet. Exposed area ratio, water chemistry and joint geometry can change the effect. Appropriate isolating components may help, but their load capacity, temperature suitability and seal compatibility must also be checked. Details that retain water need separate assessment for crevice corrosion. Knowing the names of two metals is not enough to approve the entire connection design.
Review the wet connection detail
If insulating washers are proposed, check whether electrical contact remains through another path between the pipe and fastener. Adding insulation alone may not resolve a joint that traps water. Show installation, seals and drainage in one coordinated detail. For chemical or hot service, confirm the isolating material’s own resistance as well as its ability to maintain separation.
Does every dissimilar-metal contact cause corrosion?
No. Electrolyte, electrical contact, area ratio and exposure conditions must be considered together.
