Stainless hollow section weight calculation formula
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Stainless hollow section weight calculation formula

For a rectangular hollow section idealised with sharp corners, theoretical area is A×B−(A−2t)×(B−2t).

For a rectangular hollow section idealised with sharp corners, theoretical area is A×B−(A−2t)×(B−2t).

Technical considerations

For a rectangular hollow section idealised with sharp corners, theoretical area is A×B−(A−2t)×(B−2t). With dimensions in millimetres and density in g/cm³, multiply area by density and divide by 1,000 to obtain kg/m. A 40×40×2 mm grade 304 section gives approximately 2.41 kg/m under this simplified model. Real rounded corners and manufacturing tolerances change the result. A manufacturer's section table or agreed weighing method may therefore be the better commercial reference. The calculator supports preliminary ordering rather than replacing product data.

Separate the simplified estimate from product data

For 40×40×2 mm, the sharp-corner model gives 304 mm² area. Real corner radii alter both area and mass. If a product table gives a different weight, compare its geometry and density basis rather than declaring the calculator exact. Across many stock lengths, small kg/m differences can affect estimated transport mass and purchasing totals.

Does the formula model corners exactly?

No. The simplified formula does not model corner radii and gives an approximate result.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗