Square and mitre cutting of stainless steel angles
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Square and mitre cutting of stainless steel angles

For mitre cuts, identify the measurement reference face. Long-point and short-point dimensions differ.

For mitre cuts, identify the measurement reference face. Long-point and short-point dimensions differ.

Technical assessment

For mitre cuts, identify the measurement reference face. Long-point and short-point dimensions differ.

Practical example and verification method

If frame members mitred at 45 degrees are specified by long-point length, use that convention consistently throughout the list. Small section sketches showing cut direction help prevent incorrectly mirrored pieces. Decide first whether the frame is specified by outside or inside dimensions. Convert component lengths to one consistent end reference. Check each cut direction on a sketch and separate mirrored pieces. Trial-fit the first pair to verify angle and length. Document any weld gap allowance: the face against the machine stop affects the result just as the machine’s angle setting does.

Order information and decision limits

Show cut angle, length reference and quantities of left- and right-hand parts on the drawing. Stating only a 45-degree cut does not ensure mating pieces are oriented correctly.

Square and mitre cutting of stainless steel angles

For mitre cuts, identify the measurement reference face. Long-point and short-point dimensions differ.

What should this enquiry include?

Show cut angle, length reference and quantities of left- and right-hand parts on the drawing.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗