Unequal legs alter connection area and the position of section axes. The orientation of the longer leg influences assembly behaviour.
Technical assessment
Unequal legs alter connection area and the position of section axes. The orientation of the longer leg influences assembly behaviour.
Practical example and verification method
If holes in a 60×40×5 angle belong in the long leg, show this explicitly. Turning the part over changes the connection position despite identical external dimensions; mark left- and right-hand assemblies separately. Draw the section in its actual installed orientation and label the long leg. Dimension hole centres from one reference face. Check whether those references remain valid when the part is turned over. Assign separate codes to left- and right-hand components. During a sample assembly, check washer, nut and tool access: correct external dimensions do not automatically make every connection accessible after the parts are joined.
Order information and decision limits
For a size such as 60×40×5, also state orientation and hole positions. Two angles of equal weight do not necessarily have the same bending or torsional behaviour.
Selecting unequal-leg stainless steel angle
Unequal legs alter connection area and the position of section axes. The orientation of the longer leg influences assembly behaviour.
What should this enquiry include?
For a size such as 60×40×5, also state orientation and hole positions.
