Selecting stainless pipe wall thickness
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Selecting stainless pipe wall thickness

Wall thickness cannot be selected from a tube's apparent heaviness alone.

Wall thickness cannot be selected from a tube's apparent heaviness alone.

Technical considerations

Wall thickness cannot be selected from a tube's apparent heaviness alone. Internal pressure, temperature, mechanical loading, corrosion allowance, joint design and manufacturing tolerances must be considered together. Decorative tubing may instead be governed by impact resistance, span and connection stiffness. Increasing the wall at a fixed outside diameter reduces the bore and changes the available flow area. A weight calculation helps estimate the order quantity; it does not establish an allowable working pressure. Pressure equipment requires a competent design calculation under the applicable standard and documented product selection.

Track the effect of changing the section

A 50×2 mm tube has a theoretical 46 mm bore; changing to 50×3 mm reduces it to 44 mm. Although outside diameter is unchanged, internal passage and kg/m change. When revising a wall thickness, retain fitting compatibility, flow calculations and assembly clearance on the review list. The nominal dimensions used in design should match the supplied product.

Can pressure capability be inferred from mass?

No. Grade, temperature and the applicable pressure design rules are also required.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗