Selecting stainless hollow sections for furniture frames
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Selecting stainless hollow sections for furniture frames

Furniture frames need joints that tolerate repeated use as well as an attractive finish.

Furniture frames need joints that tolerate repeated use as well as an attractive finish.

Technical considerations

Furniture frames need joints that tolerate repeated use as well as an attractive finish. Section size should not be reduced solely to achieve a visually slender appearance. Sitting, side loading and tipping can impose joint actions different from a simple vertical load. Open ends, sharp edges and inaccessible cleaning areas deserve attention. A prototype should be checked for diagonals, surface consistency and stable contact with the floor. Any applicable product safety or performance requirements should be established before the material is ordered.

Assess the prototype in realistic use

A table frame that does not rock on a flat floor has not necessarily demonstrated every required use condition. Joint loosening and sharp edges need separate attention. Define intended use and any relevant test requirements for evaluation. Prototype review is also a useful time to check compatibility between protective feet, metal finishes and the proposed cleaning products.

Can the section be reduced for a slimmer look?

It should not be reduced solely for appearance without design and performance verification.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗