The open angle section can be sensitive to torsion. Shelf span, support locations and load position determine behaviour.
Technical assessment
The open angle section can be sensitive to torsion. Shelf span, support locations and load position determine behaviour.
Practical example and verification method
One heavy machine at midspan is not equivalent to distributed boxes. State total load and its position separately; do not automatically reuse an earlier section selection after changing shelf span. Prepare a small plan showing shelf span and actual load positions. State how much rotation the connections allow and whether bracing is present. Have a competent designer assess deflection and stability. Recheck the design if span or load distribution changes. For washdown service, inspect water traps and inaccessible gaps too: load capacity and hygienic design are separate requirements that both need attention.
Order information and decision limits
Provide distributed loads, point loads and wet-cleaning conditions as design inputs. Safe shelf capacity cannot be inferred from an angle’s weight per metre alone.
Selecting stainless angles for shelving and frames
The open angle section can be sensitive to torsion. Shelf span, support locations and load position determine behaviour.
What should this enquiry include?
Provide distributed loads, point loads and wet-cleaning conditions as design inputs.
