A nominal section size does not mean that every location on the delivered length will measure exactly that value.
Technical considerations
A nominal section size does not mean that every location on the delivered length will measure exactly that value. Overall dimensions, wall thickness, corner geometry, twist and straightness have separate tolerances. Identify the product standard or special acceptance criteria in the enquiry. If a precision component must fit inside the section, do not rely only on catalogue outside dimensions. Check minimum internal clearance and corner effects on a sample. Build the tolerance stack from both the section and the components that connect to it.
Consider the tolerance stack
A section’s maximum outside size may conflict with the receiving bracket’s minimum opening. Accepting both parts against their separate nominal sizes does not guarantee assembly. Review the worst-case dimensional combination, or an appropriate statistical method, with the designer. Shared inspection points and instrument requirements also reduce avoidable disagreements over acceptance between supplier, fabricator and installer.
Does nominal size guarantee assembly?
No. Tolerances of mating components must be considered together.
