Preparing a stainless hollow-section cutting list
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Preparing a stainless hollow-section cutting list

A useful cutting list identifies every part by section size, grade, finished length and quantity.

A useful cutting list identifies every part by section size, grade, finished length and quantity.

Technical considerations

A useful cutting list identifies every part by section size, grade, finished length and quantity. For mitred pieces, state whether length is measured to the long point or short point. Left- and right-hand pieces may share a length but differ in hole orientation, so length alone may not define the part. Stock optimisation should include kerf, end trims and useful remnants. Revision numbering prevents old and new dimensions from becoming mixed. If delivery identification is required, agree a marking method that will not damage the intended surface.

Link revisions to part references

When a length changes, resend the revised list rather than placing only the new number in an email. State whether previously cut parts remain usable. Give left- and right-hand parts distinct references. Counting actual delivered pieces against each reference makes missing or incorrect parts easier to identify than comparing only the combined total number of pieces.

How should a mitred length be listed?

State long-point or short-point reference and show end orientation on the drawing.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗