Post-weld cleaning and passivation of stainless pipe
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Post-weld cleaning and passivation of stainless pipe

Weld heat tint and deposited iron should be assessed for their effect on stainless pipe service performance.

Weld heat tint and deposited iron should be assessed for their effect on stainless pipe service performance.

Technical considerations

Weld heat tint and deposited iron should be assessed for their effect on stainless pipe service performance. Cleaning, pickling and passivation are different operations with different purposes. Simply wiping a heavy oxide layer may not restore the affected surface beneath it. Method selection depends on whether the treatment is internal or external, access, finish expectations and chemical compatibility. Acid-based treatments require qualified specialists, suitable safety measures and proper waste handling. Final rinsing and residual contamination checks are particularly relevant for process pipework.

Define the objective of surface treatment

Removing oil requires a different approach from removing heavy welding oxide. When specifying treatment, define the final condition, rinsing requirements and acceptance method. If the interior cannot be accessed directly, plan a method that reaches the entire required area. The responsible specialist should control residual solutions and drainage after chemical treatment, rather than assuming the operation ends when the visible colour disappears.

Is passivation the same as pickling?

No. Their purposes and the surface conditions they address differ.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗