Holes near a bend line can be distorted during forming.
Direct answer and application context
Holes near a bend line can be distorted during forming. The necessary clearance depends on thickness, inside radius, tooling and hole geometry. One fixed distance is not valid for every stainless component. For critical mounting holes, assess the operation sequence and whether machining after bending is more appropriate.
Ordering and fabrication checks
Dimension hole centres from relevant finished reference surfaces. Clarify who is responsible for developing the blank. Check long slots and holes near edges on a first sample. Precision in the flat sheet alone is insufficient unless the tolerance chain in the final assembly has also been reviewed.
Reference dimensions for assembly holes
Locating a hole from the edge of a flat blank does not by itself guarantee its position relative to a finished mounting face. Bend allowance and springback enter the result. Dimension critical holes from finished references, then have the fabricator review whether the proposed process sequence can meet the tolerance.
Why can a hole near a bend become distorted?
The surrounding material can enter the forming strain zone; clearance and tooling require assessment.
