A small mitre-angle error can become a visible joint gap as section width increases.
Technical considerations
A small mitre-angle error can become a visible joint gap as section width increases. Vice alignment and end squareness matter as much as the saw's angle setting. The two cuts must combine to form the required corner; judging each separately as “about 45 degrees” is insufficient. Check the first assembly dry before welding. Burrs can distort measurement and prevent full seating. For visible frames, agree the intended corner shape and allowance for blending before production begins.
State long-point and short-point lengths
A mitred part has different apparent lengths depending on measurement points. Show whether the dimension refers to long points or short points and indicate the orientation of both ends. Identical numbers on left- and right-hand parts do not imply identical geometry. Checking the first assembled pair can prevent an entire batch being cut to the wrong interpretation.
Is “45-degree cut” a sufficient instruction?
No. End orientation, length reference and acceptance tolerance must also be defined.
