Weld shrinkage in a stainless hollow-section frame can alter dimensions and diagonals.
Technical considerations
Weld shrinkage in a stainless hollow-section frame can alter dimensions and diagonals. Tack sequence, fixtures, joint gaps and weld distribution should be planned together. Fully completing one corner before moving to the next is not appropriate for every geometry. Check the starting accuracy of the parts rather than using welding to force a poor fixture into shape. Final measurements after cooling may differ from measurements taken while the assembly remains warm. The procedure, filler selection and surface restoration should suit the grade family and service application.
Measure diagonals after cooling
Recording both diagonals of a rectangular frame helps identify loss of squareness, but it does not reveal every out-of-plane distortion. Add a flatness check. For repeat production, record the fixture and welding sequence used for the accepted first piece. Any corrective heating that could affect material properties should be managed through a competent procedure rather than improvised on the shop floor.
Do equal diagonals prove flatness?
No. Out-of-plane distortion must be checked separately.
