Tube laser equipment can produce holes and interlocking features within one fabrication flow.
Technical considerations
Tube laser equipment can produce holes and interlocking features within one fabrication flow. Drawings still need to account for corner radii, actual wall thickness and assembly clearance as well as nominal overall size. Where opposite holes are required, specify the allowable axis mismatch. Sharp internal corners and very narrow bridges may conflict with process limits. A self-locating tab-and-slot joint must leave enough access for welding. Agree first-piece approval and identification methods before releasing a series rather than assuming the digital drawing alone resolves manufacturing details.
Use consistent hole datums
Hole positions can become ambiguous if one is referenced from an outside face and another from the centreline. Use consistent datums and part orientation. Clearance that eases assembly must not undermine a load-transferring connection. Specify removal of burrs and cutting residues together with the finished surface expectations so the process does not stop at a nominally correct hole location.
Does an interlocking tab define the weld gap?
It must be specified separately; self-location alone does not ensure suitable weld preparation.
