Approximate pipe mass per metre follows from cross-sectional area multiplied by density.
Technical considerations
Approximate pipe mass per metre follows from cross-sectional area multiplied by density. With outside diameter D and wall thickness t in millimetres, the area is π×t×(D−t). Multiply that area by density in g/cm³ and divide by 1,000 to obtain kg/m. Using approximately 7.93 for grade 304, a 50×2 mm tube is about 2.39 kg/m. A six-metre length is therefore about 14.35 kg theoretically. The calculation excludes detailed weld geometry, actual dimensional variation and packaging. Where a commercial agreement uses measured weight, the agreed weighing method takes precedence over this estimate.
Calculate each schedule line
Use separate kg/m values when a project contains both 50×2 and 50×3 mm tubes. Multiplying by millimetre lengths without converting to metres creates a factor-of-one-thousand error. Displaying two decimal places does not prove that the estimate is accurate to that precision. Distinguish net material mass from the gross packaged shipping weight.
How is a six-metre mass found?
Multiply theoretical kg/m by six, then account separately for actual dimensions and cutting conditions.
