How to calculate stainless flat bar weight
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

How to calculate stainless flat bar weight

For a solid rectangular section, weight comes from area, length and density.

For a solid rectangular section, weight comes from area, length and density.

Direct answer and technical context

For a solid rectangular section, weight comes from area, length and density. With width and thickness in millimetres and length in metres, kilograms equal width × thickness × length × density / 1000, using density in g/cm³. A 40 × 5 mm, 6 m 304 bar therefore weighs about 9.516 kg at an assumed density of 7.93.

Application and purchasing checks

The calculation assumes nominal section dimensions. Manufacturing tolerances, edge shape, drilled holes and chamfers can change measured mass. Packaging is excluded. Show the total multiplied by quantity separately and do not confuse theoretical net mass with the measured weight of the delivery.

Practical example and checkpoint

Twelve six-metre bars from the example give a theoretical total of 9.516 × 12 = 114.192 kg. Sawing allowances still need consideration when producing shorter pieces. Do not present finished-part mass and total purchased stock-bar mass as though they were the same quantity.

Which density unit does the flat-bar formula use?

The stated formula uses g/cm³, millimetres for width and thickness, and metres for length.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗