Many stainless hollow sections are made by forming strip and joining it with a longitudinal weld.
Technical considerations
Many stainless hollow sections are made by forming strip and joining it with a longitudinal weld. The forming route and sequence can influence corner shape and seam position. Final finishing changes appearance, but brightness alone cannot establish technical suitability. A purchase specification should identify the product standard, grade, dimensions and acceptance requirements. Discuss seam position early if it matters to later fabrication. Knowing the real cross-section geometry is especially helpful for fitted inserts and holes close to corners, where an idealised drawing may hide a practical interference.
Relate seam position to later operations
Seam position may matter where an insert passes inside or a hole sits near a corner. Ask the producer whether that position can be controlled and repeated. Looking only at the external faces of a sample can hide relevant internal details. Record manufacturing-route information separately from the finished product’s dimensional and surface requirements so neither is mistaken for the other.
Does a bright finish prove the manufacturing route?
No. Route and technical suitability are assessed through documentation and specification.
