DN identifies a nominal size; it is not simply the measured outside diameter written in millimetres.
Technical considerations
DN identifies a nominal size; it is not simply the measured outside diameter written in millimetres. Inch-based pipe series and metric decorative tubing can look similar in a quotation while having different actual outside diameters. A fitting's nominal designation should therefore not be equated directly with a ruler measurement. Use a compatible standard family for both pipe and fittings and request the actual outside diameter and wall thickness. When replacing an existing line, record its markings, measure several locations and identify the connection type before selecting the replacement.
Confirm fitting compatibility before purchase
If an existing elbow has lost its marking, record outside diameter, connection type and measured wall rather than guessing the nominal designation. A seal seat or weld preparation may not fit every series sharing a similar name. Match supplier drawings before ordering. Forcing two close diameters together is not evidence of a compatible connection.
Is DN the measured outside diameter?
No. DN is a nominal size designation; actual outside diameter must be confirmed separately.
