Cutting allowance and length tolerance for flat bar
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Cutting allowance and length tolerance for flat bar

Finished part length and purchased length are not the same.

Finished part length and purchased length are not the same.

Direct answer and technical context

Finished part length and purchased length are not the same. Saw kerf, end trimming and any later machining allowance must be included. Dividing stock length by finished length may overstate the available quantity because it ignores cutting losses. A realistic cutting layout accounts for individual cuts.

Application and purchasing checks

Prepare the finished length and quantity list first. Establish allowances from the manufacturing plan and state cutting tolerance in the enquiry. Compare combinations when several lengths are required. If remnants will be reused, preserve identification of both their dimensions and material grade.

Practical example and checkpoint

Two finished three-metre pieces from a six-metre stock length leave no allowance for saw kerf. Stock-length tolerance and end trimming can matter too. Review the finished lengths or required starting length with the fabricator to avoid discovering a shortage during delivery.

Is dividing stock length enough to calculate piece count?

Not without including kerf losses and necessary processing allowances.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗