Real bar corners may not be as sharp as an ideal mathematical hexagon. Corner condition and face accuracy influence workholding.
Technical assessment
Real bar corners may not be as sharp as an ideal mathematical hexagon. Corner condition and face accuracy influence workholding.
Practical example and verification method
If raw hexagon stock will be used directly in a wrench, check corner condition and wrench contact on a sample. For a CNC collet, assess across-flats variation; the same nominal size can behave differently in workholding. Establish whether raw corners remain on the finished part. If they do, define acceptable corner rounding and surface defects using a sample. Check each pair of flats and how the stock seats in its collet. Compare any jaw marks against the permitted surface condition. Requesting unnecessarily sharp corners can raise cost; conversely, a general nominal size is insufficient where corner geometry is functionally critical.
Order information and decision limits
Specify corner condition and surface acceptance criteria as well as across-flats size. A standard nominal size does not mean precision finished wrench flats are ready without machining.
Corner and face tolerances on stainless hexagon bar
Real bar corners may not be as sharp as an ideal mathematical hexagon. Corner condition and face accuracy influence workholding.
What should this enquiry include?
Specify corner condition and surface acceptance criteria as well as across-flats size.
