To convert pipe kilograms into metres, divide total mass by the theoretical mass per metre.
Technical considerations
To convert pipe kilograms into metres, divide total mass by the theoretical mass per metre. Divide that length by the required piece length to estimate piece count, then apply the actual whole-piece ordering rule. A result of 12.4 pieces must not automatically be approved as twelve pieces. Cutting losses and dimensional variation can alter the necessary purchase quantity. Using one average kg/m value across several diameters is unreliable. Calculate each combination of diameter, wall and grade on its own line before adding the totals.
Translate fractional pieces into an order
An 80 kg estimate might correspond to 5.57 six-metre lengths. That does not mean 5.57 physical stock lengths can be purchased. Ask whether cut lengths are offered, how loss is handled and which ordering unit applies. Do not finalise the budget before defining the rounding rule: installed net metres and purchased metres may be different quantities.
Can I round piece count down?
Review whole-piece rules and the cutting plan so the net material requirement is not reduced.
