Cutting fluid, chips and free-iron contamination can affect later service. Choose cleaning processes compatible with the surface and application.
Technical assessment
Cutting fluid, chips and free-iron contamination can affect later service. Choose cleaning processes compatible with the surface and application.
Practical example and verification method
Before packaging a machined shaft, inspect grooves and holes for retained chips. Wiping the outside may leave cutting fluid in internal pockets; use an inspection method appropriate to the next process’s cleanliness requirement. Define the next use and acceptable residue level first. Confirm compatibility between the cleaner, material and other surface treatments. Inspect blind holes and groove corners separately, since residues may remain despite a clean exterior. Follow the selected procedure for rinsing and drying. Do not return the cleaned component to a contaminated bench; check that final packaging can maintain the required cleanliness level.
Order information and decision limits
For food or sensitive-fluid contact, specify final cleaning and packaging criteria in the order. Chemical surface treatment requires trained personnel, a suitable procedure and appropriate safety measures.
Cleaning stainless shafts after machining
Cutting fluid, chips and free-iron contamination can affect later service. Choose cleaning processes compatible with the surface and application.
What should this enquiry include?
For food or sensitive-fluid contact, specify final cleaning and packaging criteria in the order.
