Choosing a square or rectangular hollow section involves more than appearance.
Technical considerations
Choosing a square or rectangular hollow section involves more than appearance. A rectangular section behaves differently in bending about its two principal axes, so its orientation relative to the load matters. A square section is more geometrically symmetric about those axes, although corner radii, the weld seam and connections still affect the design. Establish span and load distribution for a shelf, workbench or machine frame. Two different sections with the same kilograms per metre should not be assumed to provide identical strength or deflection performance.
Show section orientation on the drawing
A 60×30 mm rectangle does not have the same bending behaviour with its 60 mm dimension vertical as horizontal. Show orientation as well as section size on the drawing. Connections that restrain rotation and the location of load application matter too. An available alternative with the same mass should not be substituted without design approval.
Does equal mass mean equal strength?
No. Section geometry and load direction change performance.
