For round bar, kg/m = πd²ρ/4000, using diameter d in millimetres and density ρ in g/cm³.
Technical assessment
For round bar, kg/m = πd²ρ/4000, using diameter d in millimetres and density ρ in g/cm³.
Practical example and verification method
A 20 mm diameter, 3 m long 304 bar has an ideal mass of approximately 7.47 kg. Ten lengths give approximately 74.7 kg. Cutting losses reduce the usable component quantity obtained from that raw stock. Check first that diameter is entered in millimetres and length in metres. Distinguish measured diameter from nominal size when checking the stock. Apply an approximate density appropriate to the grade; density differences change the result slightly. Multiply length by quantity and then by unit mass. Compare the result with package information: investigate unit and quantity errors before attributing a large discrepancy to manufacturing tolerances.
Order information and decision limits
With an approximate density of 7.93 for 304, a 20 mm round bar weighs about 2.49 kg/m. The theoretical calculation does not replace weighing, dimensional tolerance information or a material certificate.
Calculating stainless steel bar weight per metre
For round bar, kg/m = πd²ρ/4000, using diameter d in millimetres and density ρ in g/cm³.
What should this enquiry include?
With an approximate density of 7.93 for 304, a 20 mm round bar weighs about 2.49 kg/m.
