Calculating stainless steel angle weight
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Calculating stainless steel angle weight

For an ideal section, area is t(a+b−t). With dimensions in millimetres, kg/m = t(a+b−t)ρ/1000.

For an ideal section, area is t(a+b−t). With dimensions in millimetres, kg/m = t(a+b−t)ρ/1000.

Technical assessment

For an ideal section, area is t(a+b−t). With dimensions in millimetres, kg/m = t(a+b−t)ρ/1000.

Practical example and verification method

A 6 m length of 40×40×4 angle has an ideal mass of approximately 14.46 kg. Four lengths give about 57.86 kg. Account separately for packaging and actual tolerances when using this figure for shipment planning. Enter both leg sizes and thickness in the same units. Check that the overlapping corner square is subtracted once: simply adding two rectangles overstates area. Add length and quantity next. A method excluding corner radii may differ slightly from a manufacturer’s table. For larger discrepancies, recheck thickness, grade density and units rather than presenting the idealised calculation as an exact weighed mass.

Order information and decision limits

For 40×40×4 and density 7.93, the result is approximately 2.41 kg/m. This approximation excludes corner radii and actual manufacturing tolerances; use manufacturer data for exact values.

Calculating stainless steel angle weight

For an ideal section, area is t(a+b−t). With dimensions in millimetres, kg/m = t(a+b−t)ρ/1000.

What should this enquiry include?

For 40×40×4 and density 7.93, the result is approximately 2.41 kg/m.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗