Bolted hollow-section connections and local crushing
ÖZCAN PASLANMAZ · EST. 2002
+90 212 549 27 09[email protected]

Bolted hollow-section connections and local crushing

A bolt passing through opposite walls of a thin hollow section can pull those walls inward during tightening.

A bolt passing through opposite walls of a thin hollow section can pull those walls inward during tightening.

Technical considerations

A bolt passing through opposite walls of a thin hollow section can pull those walls inward during tightening. Clamp force, hole position and any internal spacer should therefore be part of the joint design. A large washer is not a universal remedy. Assess edge distances and proximity to corners together with load direction. Check corrosion compatibility where dissimilar fastener materials are proposed. Rather than borrowing an arbitrary torque value, follow installation conditions defined for both the fastener and the complete connection.

Design clamping around the wall

The designer should determine whether an internal spacer is needed where a bolt pulls opposite walls together. Applying more torque to an already crushed section can worsen the damage. Examine the first assembly for indentation and permanent deformation. The anti-loosening method and corrosion compatibility belong in the same review, not in separate assumptions made during site installation.

Does a large washer always prevent crushing?

No. Local wall behaviour and the connection load path require separate assessment.

Share the material, grade, dimensions and quantity so our sales team can assess your request.

Request a Quote
WhatsApp ↗