Horizontal internal corners and closed contact areas can retain dirt and water. Drainage and cleaning access form part of corrosion management.
Technical assessment
Horizontal internal corners and closed contact areas can retain dirt and water. Drainage and cleaning access form part of corrosion management.
Practical example and verification method
If water remains inside a horizontal L section, inspect the drainage route. Before drilling an arbitrary drain hole after fabrication, ask the designer to assess its effects on the section, connections and surface treatment. Trace how a small amount of water would leave the assembly in its normal orientation; without slope it may remain in the inside corner. Inspect narrow gaps beneath bolts and overlapping faces. Evaluate any design change together with connection strength and cleaning access. Add accessible inspection points to the maintenance plan. Even with a more resistant grade, reducing long-term dirty-water retention remains useful.
Order information and decision limits
Review orientation, outdoor exposure and joint details together with grade selection. Sealant selection requires chemical compatibility and consideration of long-term maintenance.
Avoiding water traps in stainless angle assemblies
Horizontal internal corners and closed contact areas can retain dirt and water. Drainage and cleaning access form part of corrosion management.
What should this enquiry include?
Review orientation, outdoor exposure and joint details together with grade selection.
